Quantcast
Channel: Zedboard - Zedboard Hardware Design
Browsing latest articles
Browse All 243 View Live

Adding Wi-Fi and Bluetooth Connectivity to the ZedBoard using the Murata 1DX...

Forums: Zedboard Hardware DesignReference BSP for Petalinux 2017.3 referenced in this write-up is located here: http://zedboard.org/support/design/1521/11 Introduction The Murata 1DX Pmod can be used...

View Article


Shifting from Minized to Zedboard with same vivado project

Forums: Zedboard Hardware DesignI am working on a project in which we have to shift our system from minized to zedboard. I got to know that I have to re-assign the pins for proper working of the...

View Article


Ethernet EMIO

Forums: Zedboard Hardware DesignI read the microzed blog (77,78 and 79) on ethernet and I was able to establish an ethernet connection using eth0 port and could send and receive Ethernet frames using...

View Article

Stream data to DDR

Forums: Zedboard Hardware DesignHi all. I want to stream data coming in from the PL to the DDR3, there i want to do some data analyzing. lets say i have to input ports streaming in data (inputs from a...

View Article

Using basic sensors/ power output

Forums: Zedboard Hardware DesignHello,  I am new to using ZedBoards as a tool for projects, but an embedded design course I am taking uses it as our primary controller of various hardware devices...

View Article


Illegal instruction

Forums: Zedboard Hardware DesignHi guys, I'm following the tutorial called:ZedBoard: Zynq-7000 AP SoC Concepts, Tools, and TechniquesA Hands-On Guide to Effective Embedded System DesignZedBoard (Vivado...

View Article

ZedBoard and VITA Camera

Forums: Zedboard Hardware DesignHi Everyone, I am currently working on connecting a VITA camera to ZedBoard through FMC. I am trying to go through this tutorial and try to build the hardware through...

View Article

Fetch Interrupt from TSC2007 into linux running on MYD-C7Z020 board

Forums: Zedboard Hardware DesignHi, I am using MYD-C7Z020 development board with MYC-C7Z020 CPU Module for Xilinx XC7Z020-1CLG400C. Also I have 7" resistive touchscreen display (provided by MYiR) which...

View Article


Secure boot in Zedboard questions

Forums: Zedboard Hardware DesignHi, I'm following https://www.xilinx.com/support/documentation/application_notes/xapp1175_... to boot a secure system in Zedboard. Is it possible to programm BBRAM Key...

View Article


ZedBoard Pin Out

Forums: Zedboard Hardware DesignDear all, I am using Zedboard to implemetn a communication system. My project lead has asked me to make a complete pinout of ZedBaord on MS Excel worksheet. I have used...

View Article
Browsing latest articles
Browse All 243 View Live