program one zedboard properly but unable to do it in another
Forums: Zedboard Hardware DesignHi all I am able to program one zedboard properly and i am able to obtain output.But when i try to program another just by ireplacing my zedboard i am not able to obtain...
View ArticlePS-PL communication
Forums: Zedboard Hardware DesignI'm very new in zynq platform. We are trying to communicate between PL-PS or vice versa. We have 188 byte generic message which is coming irregular interval of time from...
View ArticleGNU Radio
Forums: Zedboard Hardware DesignI want to use zedboard for GNU Radio. There is an SD card (4 GB) provided with the kit . Please help me how to install the GNU Radio on SD card. Actually, I want to...
View ArticleZedboard does not turn on
Forums: Zedboard Hardware DesignI bought two ZedBoards yesterday and did a getting started guide. However, one ZedBoard does not turn on today while the other one does turn on well. I think that power...
View ArticleUsing LED-s from Linux
Forums: Zedboard Hardware DesignHello! Im using a Zedboard, but not the "Out-Of-Box" Linux. Instead, i use the Ubuntu that Xilinx provides here:http://www.wiki.xilinx.com/Ubuntu+on+Zynq The problem is...
View ArticleZedBoard Rev.C + AD-FMCMOTCON2-EBZ
Forums: Zedboard Hardware DesignHello everyone, since 2 months I am in the world of ZedBoard. I always got problems when I wanted to download the bitstreams per USB-UART interface and run the external...
View ArticleZedBoard-HDMI Display Controller Tutorial
Forums: Zedboard Hardware DesignI do the lab based on <ZedBoard HDMI Display Controller Tutorial> on my ZedBoard. The Tutorial required software is vivado 2013.4,but my vivado is 2014.4. When I...
View ArticleZedBoard HDMI VIPP, Vivado 2014
Forums: Zedboard Hardware DesignHi I am trying to use the ZedBoard_HDMI_Display_Tutorial_2013_4_20140623.zip that I downloaded from Zedboard reference design forum at:ZedBoard HDMI VIPP, Vivado...
View ArticleZedboard Power Cable
Forums: Zedboard Hardware DesignGood afternoon, I recently received a Zedboard from someone but they were unable to find the power cable. I was hoping someone from the company could supply product...
View ArticleEmbedded Vision Kit
Forums: Zedboard Hardware DesignHi all, On github I see in https://github.com/Avnet/hdl/blob/master/Projects/fmchc_python1300c/zedboard_fmchc_python1300c.xdc that the camera clock is defined as 54 MHz...
View ArticleControl Ethernet on Zedboard
Forums: Zedboard Hardware DesignHello all! I work with Zedboard and Vivado 2017.2. I would like to send data from sensors connected to FMC port using Ethernet to PC. This must be very fast data...
View ArticleAXI Full peripheral
Forums: Zedboard Hardware DesignI want to create an ALU IP using an AXI4 Full interface on the zedboard. Are there any tutorials available for the same?
View ArticleHDMI display control driver
Forums: Zedboard Hardware DesignHello experts, I have implemented the HDMI display control design in Vivado 16.2. The design works fine, but there is a small abnormal situation that every time I get...
View Articlezedboard LPC FMC J1 Connector
Forums: Zedboard Hardware DesignHello, I want to interface zedboard with EVAL-AD7768-4FMCZ board via LPC-FMC. I want to know about FMC J1 connector of zedboard. which pins of zynq 7000 (PL-section)...
View ArticleXADC working without power supply?
Forums: Zedboard Hardware DesignHello guys. I was wondering how it is possible that the XADC in the Zedboard does actually convert data even though I didn't feed it with 1.8V power supply? I mean there...
View ArticleCreate configuration part
Forums: Zedboard Hardware DesignHeLLo!!! Please help me to find out the solution of this problem. Appropriate configuration memory part for the Zedboad (xc7z020-1) I've chosen mt25/ql512 as I assume...
View ArticleZedboard LPC connector
Forums: Zedboard Hardware DesignHi! I have two Zedboards available - i used one with an additional card, which is connected via the LPC FMC connector. It worked fine. Yesterday i switched to the new,...
View ArticleZedboard Netlist File
Forums: Zedboard Hardware DesignHello, I want to do the boundary scan tests of Zedboard Zynq-7000. I do have a JTAG controller and software but I need a netlist file (preferably in .net format). How...
View ArticleZedboard Rev D Hello World SDK 2017.2 not working
Forums: Zedboard Hardware DesignHello, I am working on the Speedway Zedboard lab tutorials. I am currently trying to get the Hello World example to work. On the last step of running the project I get...
View ArticleExamples about Tri Mode Ethernet Mac IP core for Zedboard
Forums: Zedboard Hardware DesignHi everyone, i have bought a zedboard board, i run my application based lwIP in it and it run well . In my PC, i write C-socket program to transfer .bin file but when...
View Article